BVMRH - TORLON 4275 AMIDE-IMIDE POLYMER
- MSDS: BVMRH
- Manufacturer: AMOCO PERFORMANCE PRODUCTS INC
- Product Name: TORLON 4275 AMIDE-IMIDE POLYMER
- National Stock Number: 5970-00N052653
Product Identification
Product ID:TORLON 4275 AMIDE-IMIDE POLYMER
MSDS Date:12/29/1988
FSC:5970
NIIN:00N052653
MSDS Number: BVMRH
Responsible Party
CHICAGO, IL 60601
US
Emergency Phone: 800-447-8735;800-424-9300(CHEMTREC)
Info Phone: 312-856-3304
Cage: 15958
Contractor
Telephone: 800 447-8735
Cage: 15958
Ingredients
(NATURAL GRAPHITE) (MFR CAS # 9002-84-0)
CAS: 7782-42-5
RTECS: MD9659600
OSHA PEL 15 MMPCF (MFR)
ACGIH TLV: 2.5 MG/M3 (MFR)
ETHYLENE, TETRAFLUORO-, POLYMER; (POLYTETRAFLUOROETHYLENE)
CAS: 116-14-3
RTECS: KX4025000
OSHA PEL N/K
ACGIH TLV: N/K
POLYMER; (AMIDE-IMIDE POLYMER)
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: NO SIGNIFICANT IRRIT
EXPECTED OTHER THAN POSS MECH IRRIT. INGEST: EXPECTED TO BE
RELATIVELY NON-TOX. CHRONIC INHAL OF DUST CAN HARM LUNGS. SPECIFIC
TOX TESTS HAVE NOT BEEN CONDUCTED ON PROD . HAZ EVALUATION IS BASED
ON INFO FROM SIMILAR PRODS, INGREDS, TECHNICAL LITERATURE &/OR
PROFESSIONAL (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: EXPERIENCE. GRAPHITE DUST CAN BE
LIBERATED UPON MACHINING. IT CAN CAUSE ALLERGIC SKIN RXNS IN
SUSCEPTIBLE INDIVIDUALS. OVEREXP FOR 4-10 YRS TO GRAPHITE DUST CAN
CAUSE GRAPHITE PNEUMOCONIOSIS (DISEASE OF LUNGS). THIS POLYMER
CNTNSLOW LEVELS OF POLYTETRAFLUOROETHYLENE (PTFE). VAPS WHICH
(SUPDAT)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES: FLUSH EYES WITH PLENTY OF WATER. GET MEDICAL ATTENTION
IF IRRITATION PERSISTS. SKIN: WASH EXPOSED SKIN WITH SOAP AND
WATER. INHALATION: IF ADVERSE EFFECTS OCCUR, REMOVE TO
UNCONTAMINATED AREA. I NGESTION: IF A LARGE AMOUNT IS SWALLOWED,
GET MEDICAL ATTENTION.
Fire Fighting
Flash Point:>870F,>500C
Extinguishing Media:AGENTS APPROVED FOR CLASS A HAZARDS (E.G.,
HALOGENATED AGENTS, FOAM, STEAM) OR WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:TEMPERATURE ABOVE 870F (500C) IS REQUIRED
TO IGNITE THE POLYMER.
Accidental Release
Spill Release Procedures:CONTAIN AND REMOVE BY MECHANICAL MEANS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NO SPECIAL REQUIREMENTS.
Other Precautions:HANDLING AND/OR PROCESSING OF THIS MATERIAL MAY
GENERATE A DUST WHICH CAN CAUSE IRRITATION OF THE EYES, SKIN, NOSE
AND THROAT.
Exposure Controls
Respiratory Protection:IF DUST IS GENERATED AND VENTILATION IS
INADEQUATE, USE A NIOSH/MSHA CERTIFIED RESPIRATOR WHICH WILL
PROTECT AGAINST DUST.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED SAFETY GLASSES .
Other Protective Equipment:NONE REQUIRED; HOWEVER, USE OF PROTECTIVE
GLOVES/CLOTHING IS GOOD INDUSTRIAL PRACTICE.
Supplemental Safety and Health
HAZ DECOMP PROD: THE FORM OF OXIDIZED PRODS CNTN CARBON, FLUORINE &
OXYGEN. EFTS OF OVEREXP: CAN CAUSE FLU-LIKE SYMPS ARE LIBERATED
FROM PTFE AT TEMPS ABOVE 250C OR IF CIGARETTES/OTHER SMKNG MATLS
ARE CONTAMD W/POLYMER DUST/MACHINE WASTE. THESE FLU-LIKE SYMPS ARE
NOT KNOWN TO OCCUR W/POLYMERS CNTN LOW LEVELS OF PTFE.
Chemical Properties
Spec Gravity:1.48 (H*2O=1)
Solubility in Water:NEGLIGIBLE, < 0.1%
Appearance and Odor:BLACK PELLETS.
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:BURNING/HEATING WILL RELS VOLAT TOX
DEGRADATION PRODS. THERMAL DEGRADATION OF POLYTETRAFLUOROETHYLENE
LEADS TO (SUPDAT)
Disposal
Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH APPLICABLE
FEDERAL, STATE AND LOCAL REGULATIONS. BURIAL AT A PERMITTED
LANDFILL IS RECOMMENDED.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.